13
Deutsch | English | Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
1. Capacity quick test: Residual capacity is determined
before charging begins and displayed for 5 seconds
2. Gentle pre-charging: Weak or deeply discharged battery is
pre-charged with lower current if necessary
3. Battery analysis: Battery behavior is analyzed and
evaluated to determine whether it is still reliably usable or
defective
4. Quick charge: Battery is charged at maximum current
5. IQ switch-off: Intelligent monitoring of the battery for
reliable charging and multiple protection against overcharging
6. Top-off charge: Ensures that the battery is gently charged
to 100% capacity
7. Trickle charge: Battery is kept in a fully charged state by
means of charging pulses
OPERATION
§ Connect the charger with the included USB cable.
§ Connect the USB cable to any suitable USB port (e.g. power
supply, PC, Power bank…).
§ Insert the battery into the charging slot with the correct polarity
(see engraving in the charging slot).
§ The product displays the charge status of the battery for 5 seconds
and then automatically starts the charging process.
§ As soon as a battery is fully charged, the charger switch to trickle
charge.
§ You can now remove the fully charged battery.
§ After all batteries have been removed, disconnect the product from
the power supply
LED INDICATION
Red Orange Green
Capacity indication (for the first 5s
after insertion)
<25% 25-75% >75%
Charging On
Error Flashing
Full / trickle charge On
Pause (*1) Flashing
To Next Page
Loading...
Need help?
General
Weight and Dimensions
