> Please note that due to the high charging current, only high per
formance brand rechargeable batteries should be charged with this
device! Low quality cells may leak and damage the charger and
invalidate the warranty!
> Keep the charger in a dry place away from direct sunlight!
> In order to avoid the risk of fire and/or electric shock, the charger
must be protected against high humidity and water!
> Before cleaning the unit, disconnect it from the mains and only use
a dry cloth!
> Never attempt to open the charger!
> Keep out of children’s reach! Children should be supervised to en
sure that they do not play with the charger!
> The device is not to be used by children or people with reduced
physical, sensory or mental capabilities. In addition, novice users
who have not fully read these instructions should be supervised or
given instruction before use!
> If the safety instructions are not followed, it may lead to damage
to the device or battery and could cause injury to the user!
> We recommend the use of ANSMANN rechargeable batteries with
this product!
TECHNICAL OVERVIEW
> Charger for 1-4 AAA or AA cells; includes 1 USB charging output
(5V 1000mA)
> Suitable for NiCd, NiMH batteries
> Multifunction clear LCD display
> Adjustable charging current for each charging slot
400mA, 600mA, 800mA for 1-4 rechargeable batteries
400mA, 600mA, 800mA, 1500mA, 1800mA for 1-2 rechargeable
batteries
> Individual charging programs for each charging slot:
CHARGE
DISCHARGE (Discharges battery before charging to minimize the
“memory effect” of batteries)
REFRESH (Cycle of charging and discharging to refresh old batteries)
TEST (Fully charges battery → discharge battery and measures
capacity → recharges battery)
> Capacity measurement in mAh/Ah
> The selected charging program can be easily read on the LCD display
> Microprocessor controlled charging and supervision of each cell
> Individual monitoring of the following parameters:
VOLTAGE (V)
CAPACITY (mAh/Ah)
TIME (hh:mm)
CURRENT (mA)
> Multiple over charging protection per cell and auto cut-off function
> Trickle charging
> Faulty cell detection / accidental Alkaline insertion detection
> Wrong polarity protection
> Can be used worldwide (100-240V) and in a vehicle (12V)
OPERATION
Using the charger in a mains power outlet (see illustration [1]; Insert
the input plug included on the two power contacts, located on the po-
wer supply, and push the plug until it clicks in to place. Please ensure
that you hear the input plug click into the power supply to ensure
the unit is safe to use. Connect the power supply to the charger with
the cable supplied. Finally, connect the power supply to the mains
(100-240V AC 50-60Hz).
Using the charger in a vehicle; Connect the DC charging cable to the
charger. Connect the DC charging cable to the 12VDC socket (12V DC)
of your vehicle. Please make sure that the power of the cigarette
To Next Page
Loading...
Need help?
General
