Need help?Do you have a question about the ANTAIRA LNX-1802G and is the answer not in the manual?
Lists key features of the industrial switch, including performance and design.
Specifies the dimensions (W x D x H) of the industrial switch.
Details the components and indicators on the front panel of the switch.
Describes the top panel of the switch, including power input connectors.
Explains the status and meaning of various LED indicators on the switch.
Details the RJ-45 ports, their auto-sensing capabilities, and MDI/MDI-X function.
Explains the dual-mode Gigabit copper and SFP combo ports for network connectivity.
Instructions for mounting the industrial switch using a DIN-Rail.
Steps for mounting the industrial switch onto a wall using a mounting plate.
Step-by-step guide for installing the industrial switch, including connections and power-up.
General| Series | LNX-1802G |
|---|---|
| Number of Ports | 18 |
| Switching Capacity | 36 Gbps |
| MAC Address Table | 8K |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% (non-condensing) |
| Ports | 16 x 10/100/1000Tx + 2 x 100/1000 SFP |
| Operating Temperature | -40°C to 75°C |
| Mounting | DIN-rail, Wall |
| Protection | IP30 |
| Certifications | CE, FCC, UL |
To Next Page
