To Next PageTo Next Page
Need help?Do you have a question about the Antares IPC2 and is the answer not in the manual?
General| Brand | Antares |
|---|---|
| Model | IPC2 |
| Category | Battery Charger |
| Language | English |
Equipment intended for professional use in commercial/light industrial locations powered by low-voltage public mains supply.
Unit suitability for other applications as a component; CE mark on manual does not apply in this case.
Lists the items included in the package: 1 Antares Power Charger and 1 Instructions for Installation & Use.
Details battery types the charger is suitable for, including 12V and 24V models of flooded/retained electrolyte lead acid batteries.
Advises reading installation instructions, warns about explosive gases during charging, and mentions statutory wiring colours.
Explains hazards of high currents, importance of earthing, and insulation of output circuits from enclosure.
Guidance on selecting a suitable location, considering environmental factors like dust, temperature, and vibration.
Information on mounting orientation, clearance for ventilation, integral flanges, and hole locations.
Details AC input supply, main output positive/negative, and auxiliary output connections.
Equipment designed for public low-voltage single phase AC mains supplies; must be earthed via input cable.
Explains the function of the CHARGE (fast charge), INPUT (float), and PROTECTION (fault) indicator lamps.
Unit can be permanently connected; no reverse drain. Engine may be started with unit connected.
Lists various models available, specifying voltage, amperage, and AC input voltage.
Details input voltage range, frequency range, inrush current, and insulation class.
Provides float voltage, boost voltage, temperature coefficients for 12V/24V models, and aux output details.
Specifies the minimum battery voltage required for charging to commence.
