What to do if all Antari S-500 respond erratically to the controller?
If your Antari DJ Equipment devices reset correctly but all respond erratically or not at all to the controller, ensure the controller is properly connected. If the XLR output of the controller doesn't match the XLR input of the first device on the link (i.e., the signal is reversed), install a phase-reversing cable between the controller and the first device on the link.
Why does my Antari S-500 DJ Equipment have no snow output?
If your Antari DJ Equipment has no snow output, the device may be too hot. Allow the device to cool down, ensure the air vents are not blocked, and increase air conditioning. Alternatively, the device may be damaged, in which case you should disconnect it and return it to your dealer. Finally, the power supply settings may not match your local AC voltage and frequency. Disconnect the device, check the settings, and correct them if necessary.
How to troubleshoot Antari S-500 DJ Equipment fixtures not functioning?
If one or more of your Antari DJ Equipment fixtures aren't functioning, first ensure that the fixture is receiving power by checking if the power is switched on and the cables are properly plugged in. If the issue persists, check if the circuit breaker is active and reset it if necessary.
Why do some Antari S-500 devices respond erratically to the controller?
If your Antari DJ Equipment devices reset correctly, but some respond erratically or not at all to the controller, there could be several reasons: * **Poor data quality:** Check the data quality. If it's much lower than 100%, the problem may stem from a bad data link connection, poor quality or broken cables, a missing termination plug, or a defective device disrupting the link. * **Bad data link connection:** Inspect the connections and cables, correct poor connections, and repair or replace any damaged cables. * **Data link not terminated:** Insert a termination plug into the output jack of the last device on the link. * **Incorrect addressing:** Verify the address settings of the devices. * **Defective device:** Bypass one device at a time until normal operation is restored b...
Instructions for checking contents upon receiving the product and handling shipping damage.
Essential guidelines for safe installation, operation, and maintenance of the device.
Key technical specifications and capabilities of the Antari S-500 snow machine.
List of compatible accessories available for purchase to enhance the device's functionality.
Important safety measures and checks before operating the snow machine.
How to operate a single S-500 unit using various control modes.
Connecting and configuring multiple S-500 units for DMX control.
How to configure and operate the snow machine using the timer function.
How to configure and operate the snow machine using volume output settings.
Steps to install the W2R wireless receiver for wireless control of the snow machine.
Procedure to pair the W2 wireless transmitter with the snow machine.
Procedure to unpair the W2 wireless transmitter from the snow machine.
How to use the W2 wireless transmitter to control snow output and fan speed.
Instructions for cleaning the snow machine to ensure optimal performance and longevity.
Information on the automatic fuse and how to reset the circuit breaker.
General| Product type | Artificial snow machine |
|---|---|
| Product color | Black |
| DMX connector type | XLR3/XLR5 |
| Snow level control | Yes |
| Snow output volume | - m³/min |
| Remote control type | Wireless |
| Liquid tank capacity | 20 L |
| DMX channels quantity | 2 channels |
| LED backlight | - |
| AC input voltage | 220-240 V |
| AC input frequency | 50/60 Hz |
Weight and Dimensions| Depth | 592 mm |
|---|---|
| Width | 551 mm |
| Height | 651 mm |
| Weight | 37200 g |
To Next Page
