What to do if all Antari S-500 respond erratically to the controller?
If your Antari DJ Equipment devices reset correctly but all respond erratically or not at all to the controller, ensure the controller is properly connected. If the XLR output of the controller doesn't match the XLR input of the first device on the link (i.e., the signal is reversed), install a phase-reversing cable between the controller and the first device on the link.
Why does my Antari S-500 DJ Equipment have no snow output?
If your Antari DJ Equipment has no snow output, the device may be too hot. Allow the device to cool down, ensure the air vents are not blocked, and increase air conditioning. Alternatively, the device may be damaged, in which case you should disconnect it and return it to your dealer. Finally, the power supply settings may not match your local AC voltage and frequency. Disconnect the device, check the settings, and correct them if necessary.
How to troubleshoot Antari S-500 DJ Equipment fixtures not functioning?
If one or more of your Antari DJ Equipment fixtures aren't functioning, first ensure that the fixture is receiving power by checking if the power is switched on and the cables are properly plugged in. If the issue persists, check if the circuit breaker is active and reset it if necessary.
General| Product type | Artificial snow machine |
|---|---|
| Product color | Black |
| DMX connector type | XLR3/XLR5 |
| Snow level control | Yes |
| Snow output volume | - m³/min |
| Remote control type | Wireless |
| Liquid tank capacity | 20 L |
| DMX channels quantity | 2 channels |
| LED backlight | - |
| AC input voltage | 220-240 V |
| AC input frequency | 50/60 Hz |
Weight and Dimensions| Depth | 592 mm |
|---|---|
| Width | 551 mm |
| Height | 651 mm |
| Weight | 37200 g |
To Next Page
