Please now refer below of “Instructions of Antari Wireless Remote for W-101”
for setting for the remote controller command.
INSTRUCTION OF ANTARI WIRELESS REMOTE FOR W-101
- Transmitter: Use DC 12V battery
- Working Distance: 50 meters in open area (wireless distance may vary
depending on the interference)
- All transmitters are compatible to any receiver
- The receiver is pre-equipped firmly and tested to each of the W-101
(rear panel), please do not try to remove it.
1. All receivers can receive signals from any registered transmitter.
2. Each receiver is able to record at most 5 signals from the transmitter.
3. The included transmitter has been registered before shipment. User
can operate it directly without any start-up setting. The initial setting is
pressing button “A” which triggers the machine and pressing button “B”
can stop the fogging.
4. If user desires to use other transmitters (except the included one in the
* Transmitter:
* Receiver:
* Functions and Setting:
To Next Page
Loading...
