VENTURI FX
PRODUCT OVERVIEW
1
AntecControls.com
|
VFX - Manual
Safety Precautions
1. Installation work and electrical wiring must be done
by qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction.
2. When cutting or drilling into wall or ceiling, do not
damage electrical wiring and other hidden utilities.
3. Use this unit only in the manner intended by the
manufacturer.
4. Before servicing or cleaning unit, switch power off at
service panel and lock service panel to prevent power
from being switched on accidentally.
5. Protect flammable materials nearby when brazing,
Use flame and heat protection barriers where needed.
Always have a fire extinguisher ready.
6. The manufacturer assumes no responsibility for personal
injury or property damage resulting from improper
handling, installation, service or operation of the
product.
Caution to Contractors
Venturi Valves are not intended for use as temporary heat
or ventilation sources during building construction. The
units are not designed nor equipped to operate in a dusty
construction environment. Internal parts can become coated
in construction dust, resulting in loss of calibration and
excess wear on the product which in turn can contribute to
reduced life.
To Next Page