Antelope Orion 32 HD User Manual

Orion32 HD | Gen 3
64-channel HDX & 32-channel USB 3.0 Audio Interface
User Manual
1. Safety Notes
To reduce the risk of electrical shocks, fire, and related hazards:
Do not remove the screws, cover, or cabinet. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Do not expose this device to rain, moisture or spillover of liquid of any kind.
Should any form of liquid or a foreign object enter the device, do not use it. Switch off
the device and then unplug it from the power source. Do not operate the device again
until the foreign object is removed or the liquid has completely dried and its residues fully
cleaned up. If in doubt, please consult the manufacturer.
Do not handle the power cables with wet hands!
Make sure the device is switched off when plugging/unplugging it to/from the power
source.
Avoid placing things on the cabinet or using the device in a narrow and poorly
ventilated place, which could affect its operation or the operation of other closely located
components.
If anything goes wrong, turn off the device first and then unplug the power. Do not
attempt to repair the device yourself. Consult authorized service personnel or your dealer.
Do not install near any heat sources such as radiators, stoves, or other devices
(including amplifiers) that produce heat.
Do not use harsh chemicals to clean your unit. Clean only with specialized cleaners for
electronics equipment.
Connect all your devices before powering your unit.
This unit is connected via its power cord to the mains safety earth. Never operate the unit
without this earth connection.
AC power supply cable should be routed so that it is not likely to be walked on or
squeezed by items placed upon or against it.
To completely turn off the device, unplug the power cable first from the outlet and then
from the rear panel of the unit.
Both occasional and continued exposure to high sound pressure levels from headphones and

Antelope Orion 32 HD Specifications

General

Brand	Antelope
Model	Orion 32 HD
Category	Accessories
Language	English

Summary

Safety Notes

General Safety and Handling Precautions

Covers essential safety measures for operating the device, including electrical hazards, liquid exposure, and maintenance.

Introduction and Key Features

Product Overview

Introduces the Orion32 HD | Gen 3, highlighting its capabilities and industry leadership in audio conversion.

Getting Started Guide

Step-by-step instructions for initial setup, software installation, and device registration.

Front Panel Controls

Power and Status Indicators

Details the function of the Power button, Oven Clock light, Lock light, and Atomic Clock Lock light.

Frequency and Display Controls

Explains the Frequency Up/Down buttons for sample rate selection and the multi-function display.

System and Preset Navigation

Describes the Antelope button for accessing menus and the Preset buttons for saving/recalling settings.

Rear Panel Connectivity

Power and Word Clock Connections

Details the Mains Power Connection (IEC) and Word Clock Input (BNC).

Digital and Analog I/O Ports

Covers 10M Input, Word Clock Outputs, S/PDIF, Monitor Outs, HDX, ADAT, MADI, USB3, and D-SUB connectors.

Software Control Panel

Routing Tab and Main View

Overview of the Routing tab and the Main View of the control panel interface.

Main View UI Elements

Details on Power/Standby, Meter Source Display, Clock Source, Sample Rate, Lock status, Devices, Presets, Settings, Info, Volume, and Mute.

Routing Tab Input/Output Sections

Explanation of the 'From' and 'To' sections within the Routing tab for signal flow.

Mixer Tab Functionality

Describes the four low-latency mixers, including fader control, solo, mute, and stereo linking.

Effects Tab Overview

Introduction to the Effects tab, detailing AFX Channel Strips and the AuraVerb effect.

HDX Tab Configuration

Details on the HDX tab settings, including HDX compensation and device routing.

Trim Tab Settings

Explanation of the Trim tab for adjusting Line In and Line Out levels.

Advanced User Tips and Resources

Ground Loop Hum and Noise Prevention

Recommendations for minimizing noise using shielded cables and proper power connections.

Troubleshooting Common Issues

Guidance on resolving startup, sound, sample rate, and routing problems.

Support and Additional Resources

Information on accessing customer support, tutorials, and user communities.