Need help?Do you have a question about the Antelope Zen Go Synergy Core and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Connectivity | USB-C |
| Headphone Outputs | 1 |
| Phantom Power | Yes |
| Bus Powered | Yes |
| A/D Resolution | 24-bit/192kHz |
| Preamps | 2 |
| OS Compatibility | macOS, Windows |
| Sample Rate | Up to 192kHz |
| Bit Depth | 24-bit |
| Microphone Preamps | 2 |
| FPGA Processing | Yes |
| Analog Inputs | 2 |
| Digital Inputs | S/PDIF |
| Digital Outputs | S/PDIF |
| DSP | Yes |
| Simultaneous I/O | 4 |
| Software | Antelope Audio Software Control Panel |
| Input Channels | 2 |
| Output Channels | 2 |
| DSP Plugins | Yes |
| Compatibility | macOS/Windows |
| Inputs | 2 x XLR-1/4" combo (mic/line/Hi-Z), 1 x Coax (S/PDIF) |
| Weight | 0.7 kg / 1.5 lbs |
Instructions for configuring the Zen Go Synergy Core for Windows 10 operating system.
Overview of the 'Devices' tab in the Antelope Launcher application.
Details about managing plug-ins within the Antelope Launcher.
Information on system settings and driver management in the Launcher.
Steps to monitor microphone audio through headphones using the Control Panel.
Adjusting input gain for the preamps.
Details on the warranty period and what is covered.
To Next Page
