Need help?Do you have a question about the Antelope Goliath and is the answer not in the manual?
General| Brand | Antelope |
|---|---|
| Model | Goliath |
| Category | Accessories |
| Language | English |
Steps for installing the Goliath software and drivers on Windows operating systems.
Steps for installing the Goliath software and drivers on Mac OS, noting Thunderbolt compatibility.
Direct outputs designed for connecting guitar amplifiers for re-amping purposes.
Hi-Z inputs with rotary control knobs for connecting instruments like bass or guitar.
Multi-function color touch screen for accessing device options and information.
Rotary knobs for adjusting input signal gain and switching input modes (Mic, Line, Hi-Z).
Talkback button activates the built-in microphone for communication with headphones/monitors.
Main knob for controlling monitor, line, or headphone volume, cycling through outputs.
Changes selected output from Stereo to Mono.
Accesses menus in combination with other buttons; used for calibration and reset.
Mutes the currently selected output.
Two independently assignable headphone outputs controllable via the main volume knob.
IEC connector supporting universal voltage (95-245 V) for worldwide compatibility.
BNC connector for accepting Word Clock reference signals.
BNC input for receiving timing reference from an Atomic Clock (e.g., 10M/10MX).
Two BNC connectors providing Word Clock output signals.
75 Ohm S/PDIF input and output for connecting compatible digital equipment.
D-SUB 25 connectors for AES/EBU digital audio signals (4 ins and 4 outs per connector).
Fiber Optic connectors for ADAT digital audio signals, supporting 8 channels per line.
Two MADI I/O connectors providing 64 tracks input and 64 tracks output each.
Stereo pair of balanced TRS outputs for connecting studio monitors.
Connects the Goliath to a Mac computer via a Thunderbolt™ port using a compatible cable.
USB Type-B connector for high-speed data transfer and 32-channel I/O at up to 192 kHz.
Three D-SUB 25 connectors for attaching breakout cables, each with 8 analog line outputs.
Two D-SUB 25 connectors for attaching breakout cables, each with 8 analog line inputs.
Two 1/4" TRS insert points for connecting external analog gear before A/D conversion.
16 Class-A mic preamps with phantom power (XLR combo), first four are Hi-Z compatible.
Access and adjust various device parameters including brightness, interface, screen saver, and SR conversion.
Adjusts the brightness level of the front panel touchscreen display.
Selects the connection type (USB or Thunderbolt) between the computer and the Goliath.
Configure screen saver appearance time and style.
Enables or disables the Sample Rate Converter for digital inputs.
Enables saving of current device settings into one of the five available preset slots.
Resets the device to factory settings, erasing all custom settings and saved presets.
Enters calibration mode to synchronize the Goliath with a 10M Atomic Clock source.
Displays serial number, hardware revision, and firmware version of the device.
Enters calibration mode to re-calibrate the touch screen response.
Indicates if the Goliath is locked to an incoming signal.
Powers the device off or switches it on from standby mode.
Shows input/output levels and signal status on the main display.
Adjusts the monitor volume level via the touchscreen or the main volume knob.
Adjusts the output volume level for the line outputs.
Cycles through headphone outputs to set their individual volume levels.
Displays and allows selection of the current clock source (e.g., Oven, WC, ADAT).
Selects the sample rate for the Goliath; current rate is displayed on the touchscreen.
Overview of the main control panel view for quick access to essential features and routing.
Options for synchronizing the Goliath using Oven, Word Clock, or digital/Thunderbolt/USB inputs.
Selects the sample rate for the device.
Selectable input modes (Mic, Line, Hi-Z) for channels 1-4 via dropdown menu.
Adjusts channel gain and mutes channels via Ctrl+Left-Click (Win) or Cmd+Left-Click (Mac).
Controls for 48V Phantom power and phase reverse per channel.
Volume faders for channels, with reset-to-zero function and level indication.
Solo and Mute buttons for individual channel control.
Controls for stereo panning and linking channels.
Controls for routing signals to auxiliary sends, with reset-to-zero function.
Master fader for controlling overall mix output level, with level indication and mute.
Option to show or hide individual mixers (Mixer 1-4).
Guide to setting up and using AuraVerb as a pre-fader send effect in Mixer 1.
Adjusts the overall tone of the reverb, affecting its brightness and character.
Creates space between source and reverb onset by controlling delay time before reverberation.
Controls the gain of early reflections, affecting perceived closeness and track thickness.
Controls the delay of late reflections, influencing echoes and spatial impression.
Fine-tune Richness, Reverb Time, Room Size, and Reverb Level for acoustic environment design.
Controls for frequency, gain, Q factor, band analysis, and filter types for EQ.
Parameters for compressor including detector, ratio, threshold, knee, attack, release, and gain.
Adjusts main monitor, line out, and ADC trim levels.
Configure oscillator levels, mute, and other related parameters.
Adjusts reamp volume, line out volume, and display brightness.
Settings for USB channel count, Thunderbolt latency mode, and ASIO control.
Guides for resolving issues related to control panel, firmware, routing, and sample rates.
Checks for signal transmission, clocking, cable issues, and routing problems.
Troubleshooting DAW buffer size, routing, device selection, and show-up problems.
Details on analog, digital, word clock, and atomic clock input connectors and capabilities.
Details on analog, digital, word clock, and USB/Thunderbolt output connectors and capabilities.
Technical details for D/A Main Monitor, D/A, and A/D converters, including dynamic range and THD+N.
Specifications for gain range and THD+N for the microphone preamplifiers.
Details on clocking system, stability, aging, calibration, sample rates, and operating temperature.
Information on weight, dimensions, power supply, and power consumption.
Access frequently asked questions and submit support tickets for assistance.
Contact support via phone or live chat for inquiries and technical assistance.
Web resource for downloading manuals, datasheets, and software updates.
Stay updated with newsfeeds, video tutorials, and blog posts about the Goliath.
To Next Page
