Need help?Do you have a question about the Anthem AVM 20 and is the answer not in the manual?
Preamplifier Section| input impedance | 20 kΩ |
|---|---|
| output impedance (Main-RCA) | 300 Ω |
| output impedance (Other-RCA) | 51 Ω |
| output impedance (XLR) | 600 Ω |
| rated input | 2.0 Vrms |
| maximum input (6-Channel S/E) | 3.0 Vrms |
| maximum input (All Others) | 5.3 Vrms |
| rated output (100 kΩ load) | 2.0 Vrms |
| minimum load | 5 kΩ |
| maximum output (RCA) | 6.3 Vrms |
| maximum output (XLR) | 12.6 Vrms |
| headphone output | 100 mW into 32 Ω |
| volume range (Main) | -95.5 dB to +31.5 dB (0.5 dB resolution) |
| volume range (Zone 2/3 & Headphone) | -70 dB to +10.0 dB (1.25 dB resolution) |
Bass Management| high-pass slope | 12 dB/octave (2nd order) |
|---|---|
| low-pass slope | 24 dB/octave (4th order) |
| crossover frequency | 25-160 Hz |
Power| supply voltage | 105-130 V, 60 Hz only |
|---|---|
| power consumption | Maximum 120 VA |
| fuse rating (Main Power Supply) | 1.0 A slow-blow 5x20 mm |
| fuse rating (Standby Power Supply) | 315 mA slow-blow 5x20 mm |
Weight and Dimensions| width | 17-1/4 inches (43.8 cm) |
|---|---|
| height | 5-7/8 inches (14.9 cm) |
| depth | 14-1/4 inches (36.2 cm) |
| weight | 27 lb (12.2 kg) |
Lists essential safety guidelines for product operation, handling, and maintenance.
Guides on checking the contents of the package and handling discrepancies.
Provides essential pre-operation checks and installation guidelines for safe use.
Details the AVM 20's operating voltage and frequency requirements.
Lists important notices and precautions for using the product.
Step-by-step instructions for connecting and setting up system components.
Illustrates various standard cable/connector types and their uses.
Illustrates typical speaker placement for surround systems and configuration options.
Identifies and explains the controls and indicators on the AVM 20's front panel.
Explains the information displayed on the front panel for various modes and settings.
Details all audio, video, antenna, and control connections on the rear panel.
Identifies and explains the functions of each button on the remote control.
Guides on connecting the power cord to the AVM 20 and a power outlet.
Explains analog and digital audio signal transmission methods and connections.
Details the types of digital audio connections (RCA, TOS, XLR) and their uses.
Explains analog audio connections using RCA cables for left/right channels.
Covers balanced and single-ended analog audio inputs for multichannel sources.
Explains Composite, S-Video, and Component video switching and connections.
Introduces surround modes for stereo and 5.1-channel source material.
Provides access to various configuration menus for optimal system setup.
Guides on configuring speaker setup, including bass management and types.
Guides on setting speaker distances for accurate soundstage and imaging.
Explains how to calibrate speaker levels using internal test noises and an SPL meter.
Guides on renaming sources, assigning inputs, setting EQ, and pre-selecting surround modes.
Guides on saving and restoring user/installer settings and reloading factory defaults.
Guides on setting passwords and enabling setup menu lockout for security.
To Next Page
