2
1.2.2 SUPPLY POWER REQUIREMENTS
The AVM 20 operates from a single phase AC power source that supplies between 105V and 130V at a
frequency of 60 Hz. It cannot be changed from 120V to 240V operation.
DO NOT USE A POWER LINE CONDITIONER:
• Some Power Line Conditioners are incompatible with the AVM 20 and may cause the AVM 20’s
AC line fuses to blow.
• One is not required because the AVM 20’s power supply has power line filtering and voltage
regulation built in.
1.2.3 IN-USE NOTICES
• Use only the power supply cord with double insulation as supplied.
• Disconnect the AVM 20’s power cord before connecting or disconnecting any components.
• Fuses are not a user serviceable item (see specification section).
• Do not remove the top cover.
• Do not alter or modify the AVM 20 in any way.
1.3 PACKING MATERIALS
Retain the shipping box and all packing material. They are custom designed to prevent shipping damage. Do
not ship or transport the AVM 20 in anything other than the original box and packing material.
1. INTRODUCTION continued …
To Next Page
Loading...
