Need help?Do you have a question about the Anthem PVA 2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Sensitivity | 1.2 V |
| Gain | 29 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 120 dB, A-weighted |
Explains the meaning of lightning flash and exclamation point symbols in an equilateral triangle.
Covers protection against shock, fire, moisture, water sources, and proper plug usage.
Advises against opening the unit and directs servicing to authorized dealers for damaged units.
Illustrates the front panel layout, including controls and indicators.
Shows the rear panel connections and ports for the PVA 2 model.
Shows the rear panel connections and ports for the PVA 5 model.
Shows the rear panel connections and ports for the PVA 7 model.
Details the 2-color LED indicator and the Power Button.
Explains trigger connections, ON modes, AC socket, RCA inputs, and speaker binding posts.
Guidelines for ensuring adequate airflow and stable placement of the amplifier.
Steps for configuring voltage, connecting components, and powering on the amplifier.
Information on the initial break-in time and a checklist for resolving operational problems.
Details connector types, relay triggers, and power/mode switches.
Covers power output, headroom, bandwidth, frequency response, THD, sensitivity, damping, and slew rate.
Lists power requirements, physical dimensions, and net weight for each model.
Explains warranty terms for USA/Canada, international, trade-ins, and used equipment.
Outlines limitations of Sonic Frontiers International's responsibility for product use.
To Next Page
