Need help?Do you have a question about the Anthem STR and is the answer not in the manual?
General| Room Correction | ARC (Anthem Room Correction) |
|---|---|
| Input Impedance | 10 kOhms |
| Power Output (8 ohms) | 200W |
| Power Output (4 ohms) | 400 W per channel |
| Inputs | 2 x Coaxial, 3 x Optical, USB |
| Outputs | Speaker terminals |
| DAC | 32-bit |
| Weight | 40 lbs |
Essential safety guidelines for operating the amplifier, covering electrical shock and handling.
Identifies and explains the function of the display and control buttons.
Details all input/output ports, including digital, analog, USB, and trigger connections.
Instructions on using the remote control and front panel to navigate the setup menu.
Explains settings for mono/stereo subwoofer connections and ARC measurement.
Adjusting the crossover frequency for optimal bass response and speaker integration.
Correcting bass cancellation by adjusting subwoofer polarity and phase.
Explains how ARC measures and adjusts speaker output for optimal in-room response.
Prerequisites for using ARC, including software compatibility and quiet environment.
Guides for installing ARC software on PC or mobile devices.
Best practices for placing the microphone for accurate room measurements.
Steps for running the ARC measurement process using automatic or manual modes.
How to use manual mode for editing targets and recalculating measurements.
Adjusting EQ cutoffs, high pass filters, and room gain for specific sound profiles.
Guidance on what not to do when using ARC, such as over-equalizing or ignoring speaker capabilities.
Controlling power, adjusting volume, and using the mute function via front panel or remote.
Explains different ways to use Anthem Room Correction (easy, intermediate, professional).
Detailed technical specifications for preamplifier and power amplifier sections.
To Next Page
