Need help?Do you have a question about the Anthem Integrated 1 and is the answer not in the manual?
Rotates to select Line Level Input (L) or optional Phono Input (O). Bypassed by Tape/EPL mode.
Adjusts relative balance of left/right channels for discrepancies. ±6dB trim.
Provides variable control over output level. Clockwise increases volume.
Routes signal through Selector or bypasses for tape/processor.
Indicates when the Integrated 1 is ON and receiving power.
Mutes the music signal when depressed, resumes normal function when released.
Controls power to the unit. Requires 30s warm-up for tubes.
Connects the detachable power cord to the unit for AC power.
5-way binding posts for connecting one pair of speakers (4 or 8 ohm taps).
Connects to external power amplifiers or crossovers for preamp-only use.
Connects to tape decks or external processors for outputting signal.
RCA connectors for connecting CD, Tuner, Aux sources.
RCA input for use as a power amplifier, bypassing preamp functions.
RCA input for tape decks or external processors, activated by the button.
Information on connecting an optional phono input module.
Step-by-step guide for safely installing vacuum tubes.
Connecting power, sources, speakers, and initial power-up.
Guidance on using the mute function and adjusting volume.
Checklist for identifying and resolving common operational issues.
Essential safety precautions regarding ventilation, liquids, and power.
Recommendations for proper unit placement and ventilation.
Information on the recommended break-in period for optimal performance.
Terms, conditions, and registration for the product warranty.
To Next Page
General
