Anthem STR - Limited Warranty

STR
INTEGRATED
AMPLIFIER
INTEGRATED AMPLIFIER
INTEGRATED AMPLIFIER
FEATURES & FUNCTIONS
• High-resolution preamplier section
• High current, high output amplier section
• Amplier uses 8 bipolar output devices per channel,
a toroidal transformer power supply, and Advanced Load
Monitoring for 200W at 8 ohms, 400W at 4 ohms,
550W at 2 ohms, all continuous
• Anthem Room Correction™ to optimize in-room response
• Bass management for two subwoofers, in mono or stereo
• Up-sampling of lower-resolution sources to 24-bit / 192 kHz
• Asynchronous USB Audio Input supports 32-bit / 384 kHz
PCM, and DSD 2.8 / 5.6 MHz sources
• S/PDIF coaxial and optical, and balanced AES/EBU inputs
• MM and MC phono, balanced XLR, and single-ended
analog inputs
• Analog Direct mode
• Graphic Front Panel Display for easy setup navigation
• Controllable via Ethernet, RS-232, or supplied IR remote
Available in both black or silver (as shown).
ROOM CORRECTION
USBDAC
Rev. 14-07-17
The revolutionary new STR Integrated Amplifier is
based on an entirely new platform. It gives you more
control and more power, with more connection
options and more advanced technology, in a single,
easy-to-use component. It combines the benefits
of an advanced pre-amp with the power of a
massive amplifier and processor, as well as functions
like leading-edge DAC, onboard Anthem Room
Correction, customizable bass manager for mono
or stereo sub outs, MM and MC phono inputs – far
more features than the average integrated amp.
And count on Anthem’s digital signal processing
innovations to deliver a noticeably higher level
of performance realism. The new STR Integrated
Amplifier drives all of your entertainment options
today, and tomorrow.
STR
INTEGRATED
AMPLIFIER
POWERING
THE FUTURE
OF AUDIO