Antop OMNIPRO Series User Manual

LAVA Electronics Inc.
Tech Support: 909-235-6611 www.lavasat.com
E
-mail:support@lavasat.com
RVHD-2000
OMNIPRO series
AM:520-1719KHz FM:47-230MHz
UHF:470-862MHz
Gain:30dBPower
Supply: DC 12V==50mA
Step 1: Choosing a Location: Make sure the mounng locaon has a
sufficient flat area so the antenna’s mounng stand can be mounted flat.
Step 2: Drilling holes: Use the mounng bracket as a template to determine
where to drill the holes.
Step 3: Assembling the Antenna: Rotate the antenna’s locking nut all the
way down on the base. Gently pull the antenna’s cables thru the mounng
stand. Screw the antenna onto the mounng stand then rotate up the locking
nut to lock the antenna into place.
Step 4: Attaching the Antenna: Feed the cables thru the hole on the roof.
Put the mounng bolts thru the holes in the mounng stand. On the interior,
place the mounng bracket then use the nuts to secure the antenna.
Step 5: Wiring: Connect the cables from the antenna to distribuon wall
plate and to the radio. Connect the power cables from the distribuon wall
plate according to the diagram below.

Antop OMNIPRO Series Specifications

General

Brand	Antop
Model	OMNIPRO Series
Category	Antenna
Language	English

Summary

Installation Instructions

Choosing a Location

Ensure the mounting location has a sufficient flat area for the antenna's mounting stand to be mounted flat.

Drilling Holes

Use the mounting bracket as a template to determine where to drill the holes for mounting.

Assembling the Antenna

Screw the antenna onto the mounting stand, then rotate the locking nut to secure it into place.

Attaching the Antenna

Feed cables through the roof hole, attach the mounting stand with bolts, and secure internally.

Wiring

Connect antenna cables to the distribution wall plate and radio, then wire power cables.

Operating Instructions

Distribution Wall Plate Features

Details on compatibility, amplifier, omnidirectional reception, and waterproof construction of the wall plate.

Selecting TV Antenna Reception

Instructions on how to press the On/Off switch to enable TV antenna reception.

Selecting Cable TV

Instructions on how to press the On/Off switch to enable cable TV reception.