Need help?Do you have a question about the Antop FLAT-PANEL SMARTPASS AT-402B and is the answer not in the manual?
General| Frequency Range | 87.5-230MHz, 470-700MHz |
|---|---|
| Smartpass Amplifier | Yes |
| 4G LTE Filter | Yes |
| Polarization | Horizontal/Vertical |
| Weight | 2.2 lbs |
| Product Type | TV Antenna |
| Reception Range | 60 miles |
| Power Supply | 12V DC |
| Connector | F connector |
| Mounting | Wall/Pole Mounting |
| VSWR | ≤2.0 |
| Impedance | 75 Ohm |
| Connector Type | F connector |
| Type | Outdoor/Indoor Antenna |
| Operating Temperature | -22°F to 158°F (-30°C to 70°C) |
Instructions for mounting the antenna on a mast pole outdoors using the provided clamp kit.
Steps to attach the table stand to the antenna for indoor placement.
Prepping coaxial cable for outdoor mast pole connection, including entry point and water prevention.
Steps for preparing coaxial cable connection for indoor attic placement.
Detailed steps for connecting the coaxial cable to the antenna and power inserter.
Instructions to set TV mode to "Antenna" or "Air" and scan for channels.
Guidance on adjusting the antenna's direction for optimal reception.
Details the product warranty period, terms, and conditions.
Procedures for returning products and obtaining refunds, including RMA requirements.
Process for exchanging or replacing defective products within the warranty period.
Information regarding shipping responsibilities and costs for merchandise.
To Next Page
