INSTRUCTIONS
Installation Instruction Manual
ANTOP’s New Generation Digital Technology
Your FLAT PANEL Smartpass Amplified HDTV Antenna / AT-402B can be used either as an
outdoor or indoor antenna. ANTOP’s New Generation Digital Technology allows you the
flexibility to set up your antenna in various locations and still receive a great digital
reception.
Following are instructions for installation options for outdoor use as a mast pole mount, as well
as for indoor options in an attic or placed on a table top. Read through all instructions prior to
beginning installation procedure.
Note:
Although this antenna is great for indoor use, a higher mounting location or
placement positioned towards the broadcast tower may result in better reception.
Install the antenna as high as possible, and preferably with a clear path between the
antenna and the TV station transmitters. Trees, buildings, mountains, etc., can all
impact the performance of any antenna.
• Smartpass Amplifier: all-in-one design allows easier connection, delivers correct
balance between short and long range reception.
• 4G LTE filter: blocks 3G and 4G wireless signals to ensure noise-free digital TV
reception.
1
To Next Page
Loading...
