Antsig AP9000 User Manual

CPIN002307
4
digital tv
signal meter
Installation and Operating Instructions
AP9000-BUN
Important! Please read these instructions carefully
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer Service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: custservice@arlec.com.au
ANTSIG is proudly produced by ARLEC Australia Pty. Ltd.
Visit us at: www.ANTSIG.com
© This instruction leaflet is subject to copyright and must not be reproduced,
copied or otherwise used in any way or for any purpose without the consent in
writing of the owner.
CPIN002307
Due to continuous research and development the specifications herein
are subject to change without notice.
AP9000_ Instructions.indd 2 16/01/12 2:08 PM

Antsig AP9000 Specifications

General

Brand	Antsig
Model	AP9000
Category	Measuring Instruments
Language	English

Summary

ANTSIG Digital TV Signal Meter

Installation and Operating Instructions

Guide on how to install and operate the ANTSIG Digital TV Signal Meter.

Important Safety Information

Emphasis on the importance of carefully reading these instructions.

Introduction

Meter Purpose and LED Indicators

Explains the meter's function in aligning aerials and how LEDs show signal strength.

Power Source

Powering the Signal Meter

Instructions for using a 9V battery or a 5-12V DC adapter.

Testing for Signal

Finding the Best Aerial Direction

Step-by-step guide to position the aerial for optimal signal reception.

Specifications

Technical Performance Data

Lists frequency range, input level, power needs, and battery type.

Accessories

Included Accessories

Details protective covers and F to PAL adaptors supplied with the unit.

Warranty

Arlec Warranty Information

Explains the 12-month warranty, claim procedures, and consumer rights.