9
Anvil Brewing Foundry™ - V4
©Anvil Brewing Equipment 2019 | www.anvilbrewing.com
Recommended Accessories
Small Scale for Measuring Hops and Salts Mash Paddle and Stir Spoon
Large Scale for Measuring Grain
Stainless Bucket Fermentor
Distillation Ready
The Foundry™ integrates seamlessly with the Turbo 500 Still unit. For installation, remove the
knob and knob washers on the lid. Follow all operation instructions in the Turbo 500 Still manual.
Zero to 100% power and temperature control makes the Foundry™ ideal for distillation. Install
the stopper (BE-000689-00) in the lid hole when in use, which is included if you purchased the
distillation kit through ANVIL Brewing Equipment.
Measuring Hops and Salts
5.5 Gallon Hot Liquor Tank
O2 Wand with Regulator
Handles up to 65 lbs with 0.02 lb accuracy Handles up to 4.4 lbs with 0.005 oz (0.1g) accuracy
Recirculation Kit
4 Gallon and 7.5 Gallon
To Next Page
Loading...