Anviz M5 - Register Users Card; Register Two Fingerprints; Register Fingerprint and Card of One User

User Manual
6
have been registered.
2.3.2. Register User’s Card
Swipe Enroll Card. The blue LED will flash quickly, and enter into registration stage.
In time we can swipe the user card.
1. After finish enrolling current user, please swipe enroll card and then continue
register another user.
2. After finish enrollment, please swipe enroll card TWICE to exit enroll status.
Note: When swipe card, Red LED flashes with two long beeps means the card have
been registered.
2.3.3. Register Two Fingerprints
If the User Card has been already registered, the red LED will flash twice and follow
with 2 beeps.
1. After finish enrolling current user, please swipe enroll card and then continue
register another user.
2. After finish enrollment, please swipe enroll card TWICE to exit enroll status.
2.3.4. Register Fingerprint and Card of one User
If the User Card has been already registered, the red LED will flash twice and follow
with 2 beeps.