AOC 20E1H User Manual

20
Clear Vision
1. When there is no OSD, Press the “ ” button to activate Clear Vision.
2. Use the “ ” or “ ” buttons to select between weak, medium, strong, or off settings. Default setting is always
“off”.
3. Press and hold “ ” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision
Demo: on” will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message
will disappear. Press and hold “ ” button for 5 seconds again, Clear Vision Demo will be off.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images
into clear and vivid images.
Clear Vision
Off
Adjust the Clear Vision
Weak
Medium
Strong
Clear Vision Demo
on or off
Disable or Enable Demo

AOC 20E1H Specifications

General

Screen Size	19.5 inches
Resolution	1600 x 900
Panel Type	TN
Refresh Rate	60 Hz
Response Time	5 ms
Aspect Ratio	16:9
Brightness	200 cd/m²
Viewing Angle	90° (H) / 65° (V)
Power Consumption	18W
Inputs	VGA