AOC 20E1H User Manual

19
Hotkeys
9E1H /20E1H /22E1H
1
Source/Auto/Exit
2
Clear Vision/
3
Image Ratio/Volume/
4
Menu/Enter
5
Power
22E1
1
Auto/Exit
2
Eco mode / DCR /
3
Image Ratio/
4
Menu/Enter
5
Power
Menu/Enter
Press to display the OSD or confirm the selection.
Power
Press the Power button to turn on/off the monitor.
Image Ratio/Volume/
When there is no OSD, Press Volume button to active volume adjustment bar, Press or to adjust volume.
When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size
is 4:3 or input signal resolution is wide format, the hot key is disable to adjust).
Auto / Exit / Source hot key
When there is no OSD, Press Auto/Source button continuously about 2 second to do auto configure. When the
OSD is closed, press Source button will be Source hot key function. Press Source button continuously to select the
input source showed in the message bar, press Menu/Enter button to change to the source selected.

AOC 20E1H Specifications

General

Screen Size	19.5 inches
Resolution	1600 x 900
Panel Type	TN
Refresh Rate	60 Hz
Response Time	5 ms
Aspect Ratio	16:9
Brightness	200 cd/m²
Viewing Angle	90° (H) / 65° (V)
Power Consumption	18W
Inputs	VGA