13
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup
ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma1
DCR Off
Off
HDR
Game Setting
1). Press the MENU-button to activate the OSD window.
2). Press
Left or Right to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate it, press
Left or Right to navigate through the sub-menu functions. Once the desired
function is highlighted, press
MENU-button to activate it.
3). Press
Left or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the
power button to turn the monitor on. To un-lock the OSD - press and hold the
MENU-button while the monitor is
power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2).
3). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state
can exist.
If the product input signal resolution is the local resolution, the "Image Ratio" item is invalid.
To Next Page
Loading...
