To Next Page

To Previous Page

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1. USB downstream+USB charging

2. USB downstream

3. USB upstream

4. Power switch

5. Power

6. DisplayPort

7. DVI

8. HDMI

9. Analog (D-Sub 15-Pin VGA cable)

10. Audio in

11. Earphone

Connect to PC

1. Connect the power cord to the back of the display rmly.

2. Turn o󰀨 your computer and unplug its power cable.

3. Connect the display signal cable to the video connector on the back of your computer.

4. Plug the power cord of your computer and your display into a nearby outlet.

5. Turn on your computer and display.

If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.

To protect equipment, always turn o󰀨 the PC and LCD monitor before connecting.

AOC 24P2QM User Manual

Questions and Answers: