Extra
1. Press (Menu) to display menu.
2. Press< or >to select (Extra), and press to enter.
3. Press< or >to select submenu, and press to enter.
4. Press< or >to adjust.
5. Press to exit.
Extra
Reset
Auto-configuration and set the
color temperature to Warm
Do not execute reset, return to
main menu.
Deep Sleep
When no signal, monitor will go to
sleep after 15 minutes
When no signal, monitor will not go
to sleep mode
USB Charge
When no signal, USB cannot
support USB charge
When no signal, USB can support
USB charge
ULMB
G_sync function disable and timing
V freq>=100HZ & V freq<=144HZ
G_sync function enable or display
card do not support G_sync
Note :
1) The OSD language is not be reseted.
2) ULMB mode cannot be adjusted when G_sync function enable or display card do not support G_sync function.
26