Note:
The function MBR and Overdrive Boost are available only when AdaptiveSync is off and the vertical frequency is up
to 75 Hz.
Extra
1. Press (Menu) to display menu.
2. Press< or >to select (Extra), and press to enter.
3. Press< or >to select submenu, and press to enter.
4. Press< or >to adjust.
5. Press to exit.
AUTO/D-SUB/DVI/HDMI1/
HDMI2/DP
Select Input Signal Source.
Auto adjust the picture to default.
Wide/4:3/1:1/17”(4:3)
/19”(4:3) /19”(5:4)
/19”W(16:10)/21.5”W(16:9)
/22”W(16:10)/23”W(16:9)
/23.6”W(16:9)/24” W(16:9)
Select image ratio for display.
Turn ON/OFF DDC/CI Support.
Reset the menu to default.
Show the information of the main image and
sub-image source.