AOC AG271FZ2 - Extra

23
Note:
The function MBR and Overdrive Boost are available only when Adaptive-Sync is off and the vertical frequency is
up to 75 Hz.
Extra
1. Press (Menu) to display menu.
2. Press< or >to select (Extra), and press to enter.
3. Press< or >to select submenu, and press to enter.
4. Press< or >to adjust.
5. Press to exit.
Input Select
AUTO/D-SUB/DVI/HDMI1/
HDMI2/DP
Select Input Signal Source.
Auto Config
yes or no
Auto adjust the picture to default.
Off timer
0-24hrs
Select DC off time.
Image Ratio
Wide/4:3/1:1/17”(4:3)
/19”(4:3) /19”(5:4)
/19”W(16:10)/21.5”W(16:9)
/22”W(16:10)/23”W(16:9)
/23.6”W(16:9)/24” W(16:9)
Select image ratio for display.
DDC/CI
yes or no
Turn ON/OFF DDC/CI Support.
Reset
Yes or no
Reset the menu to default.
Information
Show the information of the main image and
sub-image source.