To Control the Display
You can use the AOC USB USB Monitor in mirror mode or extended mode. Settings
may vary depending on your operating system.
For Microsoft® Windows® 8 and Microsoft® Windows® 7
Press the Windows® key ( ) + P to switch between different modes as shown below.
For Microsoft® Windows® XP and Microsoft® Windows
Vista®
Right-click the “ ”icon in the system tray of your Windows ® desktop to configure the
display settings.
Disconnecting the USB Monitor
1. For Microsoft® Windows® 7 only, you can turn the monitor OFF by pressing the
Windows key ( ) + P, and then selecting “Computer only”.
For Microsoft® Windows vista® and Windows® XP, you can select OFF by
right-Clicking the “ ” icon in the system tray.
2. Remove the USB cable from the computer and monitor.
Cleaning the USB Monitor
Please follow the guidelines below when cleaning the USB Monitor:
- Always unplug the monitor before cleaning.
- Use a soft cloth to wipe the screen and other parts of the monitor
- Never spray liquids directly onto the LCD screen or use harsh chemical
products to clean it.
To Next Page
Loading...
