18
Input Select Analog Select Analog Signal Source as Input
Auto Config yes or no Auto adjust the picture to default
Off timer 0-24hrs Select DC off time
Image Ratio wide or 4:3 Select wide Select wide or 4:3 format for display
DDC-CI yes or no Turn ON/OFF DDC-CI Support
Reset yes or no Reset the menu to default
Information
Show the information of the main image and
sub-image source
Exit
1
Press (Menu) to display menu.
2
Press or to select (Exit), and press to exit.
Exit Exit the main OSD
To Next Page
Loading...
Need help?
General
