To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if my AOC Monitor has no video but the power LED is white?
If your AOC monitor shows no video but the power LED is white, try the following: * Ensure the power button functions correctly. * Consider replacing the main board. * Inspect the LVDS/FFC cable or panel. * Replace the keyboard.
Why is the color not optimal on my AOC Monitor?
If the color on your AOC monitor is not optimal, try these steps: * Adjust the color settings in the user mode until you are satisfied. * Disconnect the signal cable to see if the screen color display is normal. * Consider replacing the signal cable or PC. * If problems persist, replace the main board.
How to fix a dim, overlapping, or flickering image on my AOC Monitor?
If your AOC monitor image is dim, overlapping, out of focus, or flickering, try these solutions: * Reset to factory mode. * Set to the optimal or recommended frequency. * Readjust the phase and pixel clock in the user mode. * Check the signal cable and the PC. * Consider replacing the main board or the panel.
How to troubleshoot no power on my AOC e2360Pda Monitor?
If your AOC monitor has no power, here are some things to check: 1. Make sure the power cable is securely tightened. 2. Ensure the power switch is in the “On” position. 3. Verify the LED indicator is working correctly. 4. If not, consider replacing the main board and checking all connections. Also, replace the keyboard and check the connections.
General
