AOC e2360Pda User Manual

42
9. White- Balance, Luminance Adjustment
Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.
How to setting MEM channel you can reference to chroma 7120 user guide or simpl use “SC” key and “NEXT” Key
to modify xyY value and use “ID” key to modify the TEXT description Following is the procedure to do white-balance
adjust .
2. Setting the color temp. you want
A. MEM.CHANNEL 3 Warm (6500K):
Warm color temp. parameter is x = 313 ±30, y = 329 ±30
B. MEM.CHANNEL 4 Normal (7300K):
Normal color temp. parameter is x = 301 ±30, y = 317 ±30
C. MEM.CHANNEL 9 Cool (9300K):
Cool color temp. parameter is x = 283 ±30, y = 297 ±30
D. MEM.CHANNEL 10 (sRGB color):
sRGB color temp. parameter is x = 313 ±30, y = 329 ±30
3. Enter into the factory mode
Turn off the power, press two direction keys and turn the power on. Then press the “MENU” button. The factory OSD
will appear.
4. Gain adjustment:
Move cursor to “-F-” and press MENU key
A. Adjust Warm (6500K) color-temperature
1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button)
2. Switch the MEM.channel to Channel 3 (with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 313 ±30, y = 329 ±30
4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100
6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2
B. Adjust Normal (7300K) color-temperature
1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button)
2. Switch the MEM.channel to Channel 4 (with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 301 ±30, y = 317 ±30
4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100
6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2

AOC e2360Pda Specifications

General

Brand	AOC
Model	e2360Pda
Category	Monitor
Language	English

Summary

Important Safety Notice

General Safety Precautions

Warnings about replacement parts, design modification, ESD protection, and proper handling.

Laser Safety

Safety instructions for products containing laser components to avoid hazardous radiation exposure.

Monitor Specifications

Operation Instructions

OSD Settings Menu

Comprehensive guide to navigating and adjusting the monitor's On-Screen Display (OSD) settings.

Input/Output Specifications

Panel Specifications

Schematic Diagrams

Main Board Schematic

Detailed circuit diagram of the main board, including VGA and DVI input sections.

Key Board Schematic

Power Board Schematic

PCB Layouts

Power Board PCB Layout

Maintainability

Required Equipment and Tools

Troubleshooting Guide

Step-by-step procedures to diagnose and resolve common monitor operational issues.

White Balance and Luminance Adjustment

Color Temperature Adjustments

Steps to adjust white balance for warm, normal, cool, and sRGB color temperatures.