Why is there no video on my AOC Monitor but the power LED is blue?
If your AOC monitor's power LED is blue but there's no video, ensure the power button functions correctly. If not, consider replacing the main board or converter board. Also, check the LVDS/FFC cable or panel, and replace the LVDS/FFC if necessary.
How to fix a DIM display on my AOC E2461FWH?
To address a dim display on your AOC monitor: First, reset to factory mode. Then, set the monitor to its optimal or recommended frequency. Readjust the phase and pixel clock in user mode. Check the signal cable and the PC. If the issue persists, the main board or panel may need replacement.
What to do if the color is not optimal on my AOC E2461FWH?
If the color on your AOC monitor isn't optimal, try these steps: Adjust the color settings in user mode. Disconnect the signal cable to see if the screen's color display is normal. If problems persist, replace the signal cable or PC, or consider replacing the main board.
What to do if my AOC Monitor has no power?
If your AOC monitor isn't powering on, try these steps: Ensure the power cable is securely connected. Activate the power switch. Verify the LED indicator's status. If those steps don't work, consider replacing the converter board, main board, or keyboard, checking connections each time.
General| Screen Size | 24 inches |
|---|---|
| Panel Type | TN |
| Refresh Rate | 60 Hz |
| Response Time | 5 ms |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Connectivity | VGA, DVI, HDMI |
| Resolution | 1920 x 1080 |
| Viewing Angles | 170° horizontal, 160° vertical |
To Next Page
