Hotkeys
1 Source/Auto/Exit
2 Clear vision /<
3 4:3 or wide/ Volume / >
4 Menu/Enter
5 Power
Power
Press the Power button to turn on/off the monitor.
Menu/Enter
Press to display the OSD or confirm the selection.
4:3 or wide image ratio / >
When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is
4:3 or input signal resolution is wide format, the hot key is disable to adjust. ). (VGA/DVI)
Volume / >
When there is no OSD, press Volume adjust volume. (HDMI)
Source /Auto / Exit
When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to do auto configure (only for
the models with dual or more inputs). When the OSD is closed, press Auto/Source/Exit button will be Source hot
key function (Only for the models with dual or more inputs).
To Next Page
Loading...
Need help?
General
