To Next Page

To Previous Page

18.5" LCD Color Monitor AOC F19L

3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the

monitor.

By changing these settings, the picture can be adjusted to your personal preferences.

The power cord should be connected.

Connect the video cable from the monitor to the video card.

Press the power button to turn on the monitor, the power indicator will light up.

3.2 Control Buttons

1 Eco mode(DCR) / 4 4:3 or wide /

2 Source(Auto) / 5 Menu / Power

3 Contrast /

3.3 Adjusting the Picture

• Press the Menu (Power) button to activate the OSD window. Press left, right, up, down button to navigate

through the functions. Once the desired function is highlighted, press the Menu (Power) button to activate

sub-menu .

• In sub-menu, Press up, down button to navigate through the functions. Once the desired function is

highlighted, press

, button to button to change the setting. Press Menu (Power) button to return to

superior menu.

• If you want to adjust any other function, repeat steps 1-2.

• To exit OSD windows, select “exit” icon on main OSD, then press the Menu (Power) button .

• OSD Lock Function: To lock the OSD, press and hold the Left button while the monitor is off and then press

power button to turn the monitor on. To un-lock the OSD - press and hold the Left button while the monitor is

off and then press power button to turn the monitor on.

• Eco Mode and DCR hot key : Press the Eco key continuously to select the Eco mode of brightness and DCR

on when there is no OSD ( Eco mode hot key may not be available in all models).

• Contrast adjustment hot key : When there is no OSD , press Contrast (

) to active Contrast adjustment bar,

press or to adjust Contrast.

• 4:3 or wide image ratio hot key: When there is no OSD, press

continuously to change 4:3 or wide image

ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disalbe to

adjust.)

• Source hot key : When the OSD is closed, press Auto/Source button will be Source hot key function (Only

for the models with dual or more inputs) .Press Source button continuously to select the input source

showed in the message bar , press Menu/Enter button to change to the source selected.

• Auto configure hot key: When the OSD is closed, press Auto/Source button continuously about 2 second to

do auto configure.

• Press the Power button continuously about 2 second to turn off the monitor.

AOC F19L User Manual

Questions and Answers: