34
Extra
1 Press (Menu) to display menu.
2 Press < or > to select (Extra), and press to enter.
3 Press < or > to select submenu, and press
to enter.
4 Press < or > to adjust.
5 Press
to exit.
Input Select Analog / HDMI(MHL) Select input signal source.
Auto Config yes or no Auto adjust the picture to default.
Off timer 0-24hrs Select DC off time.
Image Ratio wide or 4:3 Select wide or 4:3 format for display.
DDC-CI yes or no Turn ON/OFF DDC-CI Support.
Reset
yes or no Reset the menu to default.
Information
Show the information of the main image
and sub-image source.
To Next Page
Loading...
