To Next Page

To Previous Page

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

I2276VW I2276VWM

1. AC port

2. Analog(DB-15 VGA cable)

3. DVI (I2276VW)

4. HDMI/MHL(I2276VWM)

5. Earphone(I2276VWM)

To protect equipment, always turn off the PC and LCD monitor before connecting.

1 Connect the power cable to the AC port on the back of the monitor.

2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the

computer's D-Sub port.

3 (Optional –Requires a video card with DVI port)Connect one end of the DVI cable to the back of the monitor

and connect the other end to the computer’s DVI port.

4 (Optional –Requires a video card with HDMI/MHL port)Connect one end of the HDMI/MHL cable to the back of

the monitor and connect the other end to the computer’s HDMI/MHL port.

5 Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, please refer

Troubleshooting.

AOC I2276VW User Manual

Questions and Answers: