Hotkeys
I2276VW I2276VWM
1 Clear vision /<
2 4:3 / wide />
3 Power
4 Source/Auto/Exit
5 Menu/Enter
1 Clear vision /<
2 Volume/>or 4:3 / wide />
3 Power
4 Source/Auto/Exit
5 Menu/Enter
Power
Press the Power button to turn on/off the monitor.
Volume/>(I2276V
WM)
When there is no OSD,Press Volume button to active volume adjustment bar,Press < or > to adjust volume(Only
HDMI).
4:3 or wide / >
When there is no OSD, press >continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or
input signal resolution is wide format, the hot key is disable to adjust. ).
Auto/Exit
When there is no OSD, press Auto/Exit button continuously about 3 second to do auto configure .
Source hot key
When the OSD is closed, press Source button will be Source hot key function. Press button to select the input
source showed in the message bar ,press Menu/Enter button to change to the source selected.
22
To Next Page
Loading...
Need help?
General
