AOC I2369Vm User Manual

1. "MHL" (Mobile High-Definition Link)
Using "MHL(Mobile High-Definition Link)"
z To use the MHL function, you need an MHL-certified mobile device. You can check if your mobile device is MHL
certified on the device manufacturer's website. To find a list of MHL-certified devices, visit the official MHL website
(http://www.mhlconsortium.org).
z To use the MHL function, the latest version of software must be installed on the mobile device.
z On some mobile devices, the MHL function may not be available depending on the device's performance or
functionality.
z Since the display size of the product is larger than those of mobile devices, the picture quality may degrade.
z This product is officially MHL-certified. If you encounter any problem when using the MHL function, please contact the
manufacturer of the mobile device.
z The picture quality may degrade when content (imported from the mobile device) with a low
Resolution is played on the product.
1. Connect the micro USB port on the mobile device to the [HDMI 1 / MHL] port on the product using the MHL cable.
z When the MHL cable is used, [HDMI 1/ MHL] is the only port on this monitor that supports the MHL function.
z Mobile device must be purchased separately.
and switch to HDMI 1/MHL to activate MHL mode.
Remark: The indicated time "3 sec later" may vary depending on the mobile device.
Using "MHL"
When the mobile device is not connected or does not support MHL
This feature allows you to enjoy videos and photos (imported from a connected mobile device that supports MHL) on the
screen of
the product.
z If MHL mode is not activated, check the connection of the mobile device.
2. Press the source button
3. After about 3 seconds, the MHL screen will be displayed if MHL mode is active.

AOC I2369Vm Specifications

General

3D	No
Pixel pitch	0.265 x 0.265 mm
Aspect ratio	16:9
Screen shape	Flat
Backlight type	W-LED
Display surface	-
Pixel frequency	170 MHz
Display diagonal	23 \
Display technology	LED
Vertical scan range	50 - 76 Hz
Maximum refresh rate	60 Hz
Horizontal scan range	30 - 83 kHz
Viewable size, vertical	286.74 mm
Contrast ratio (dynamic)	20000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	509.76 mm
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	Yes
HDMI version	1.4
DisplayPort version	1.1
Headphone connectivity	3.5 mm
Tilt angle range	-3 - 21 °
Cable lock slot type	Kensington
Number of OSD languages	16
Panel mounting interface	75 x 75 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, KOR, POL, POR, RUS, SWE
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Annual energy consumption	29 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W
Mean time between failures (MTBF)	50000 h
Feet color	Black/Silver
Certification	GOST
Product color	Black, Silver
Front bezel color	Silver
Heavy metals free	Hg (mercury), Pb (lead)
Market positioning	Home
Cables included	AC, HDMI, VGA
HDMI cable length	1.5 m
Power cable length	1.2 m
Package type	Box
Package depth	138 mm
Package width	603 mm
Package height	467 mm
Package weight	5480 g
Sustainability certificates	RoHS, ENERGY STAR
Operating altitude	0 - 5000 m
Non-operating altitude	0 - 12192 m
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 93 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth (with stand)	204 mm
Height (with stand)	398 mm
Weight (with stand)	3760 g
Depth (without stand)	44.9 mm
Width (without stand)	531.4 mm
Height (without stand)	326.5 mm
Weight (without stand)	- g