39
NOTE:
*This model complies with the specifications listed below.
*Designs and specifications are subject to change without notice.
*This model may not be compatible with features and/or specifications that may
be added in the future.
*32” LCD TV (31.5” viewable) Viewable image size: diagonal 800mm
Television System:
NTSC standard
ATSC standard (8-VSB, Clear-QAM)
HDMI Terminals:
HDMI INPUT: Rear HDMI x2
HDCP compliant
E-EDID compliant
Supported scan rates: 1080i, 720p, 480p, 480i
Channel Coverage:
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mild band (A - 8 through A - 1, A through
I )
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
VGA Terminals:
VGA INPUT:
Rear VGA (D-SUB 15 Pin) Input x1
E-EDID compliant
Supported scan rates: 640X480 /60Hz/72Hz/75Hz
720X400 /70Hz
800x600 /56Hz /60Hz /72Hz
/75Hz
1024X768 /60Hz/70Hz/75Hz
1360X768 /60Hz
Recommended: 1360X768 /60Hz
Audio INPUT: Headphone Mini-jack for stereo (3.5Φ)
Power Source:
AC power supply: 100V~240 V, 50/60 Hz
Power Consumption
≤ 180 W
1 W in standby mode (power cord plugged in
and power OFF)
Dimensions:
Include Stand:
782.5mm(W) x 558.6mm(H) x 209.0mm(L)
Audio Power
5 W + 5 W, Internal Speaker
Weight: 11kg(With Stand)
Video/Audio Terminals:
Rear AV x1:
S-Video/Video/Audio Input
Wall Mounting:
200x200mm
(Wall mount kit is not included)
S-VIDEO INPUT:
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75
ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 0.5V(rms)
Supplied Accessories:
1pcs Power cord
1pcs Remote control
(with two size AAA alkaline batteries)
1pcs User manual
1pcs Setup Guide
Component INPUT:
Rear Component x1:
Y : 1V(p-p), 75 ohm, including sync.
Pr/Cr: ±0.35V(p-p), 75 ohm
Pb/Cb: ±0.35V(p-p), 75 ohm
AUDIO: 0.5V(rms)
Supported resolutions:1080i, 720p, 480p,
480i
PRODUCT SPECIFICATION
To Next Page
Loading...
Need help?
General
