To Next Page

To Previous Page

Connecting to a PC

1. Turn off the HDTV and PC.

2. Connect a 15-pin D-Sub RGB (VGA) cable

to the RGB output of your PC and the

other end to the VGA input at the rear of

the HDTV.

3. Connect the Audio Out on your computer

to the AUDIO input at the rear of the

HDTV.

4. Turn on the HDTV and PC.

5. Select VGA using the SOURCE button on

the remote, side of the HDTV or directly

by pressing the HDMI/PC button on the

Remote.

NOTE

For the best picture quality when

connecting a computer through VGA, set

your computer timing mode to native

resolution of panel. Please refer to the PC

or graphic card’s user guide for additional

information on how to set the timing

mode and the video output requirements

of the product.

Other manuals for AOC L32W961

Questions and Answers:

Need help?

Do you have a question about the AOC L32W961 and is the answer not in the manual?

General

Comb filter	3D
Response time	6.5 ms
Display diagonal	32 \
Display brightness	500 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Contrast ratio (dynamic)	20000:1
Contrast ratio (typical)	2000:1
Supported graphics resolutions	1366 x 768
Manual	Yes
Package depth	218 mm
Package width	899 mm
Package height	680 mm
Package weight	15000 g
Certification	FCC, cULus, RoHS, EPA3.0
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
PC Audio in	No
HDMI ports quantity	3
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	2
Digital audio optical out	1
Product color	Black
LED indicators	Y, Stand-by
Panel mounting interface	200 x 200 mm
Cables included	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	180 W
RMS rated power	20 W

Weight and Dimensions