42‟‟ LCD TV AOC L42W781HS
Select Man. Installation using the
button.
Press the OK button to display the Manual. Installation menu.
Use the
/ buttons to select each option.
Prog. Number : Allow to select the program on which you want save a new
channel or a program you want to modify.
Using the < / > buttons, select the program.
Frequency : Allows to enter a specific frequency for tuning.
Using the
botton, select the Frequency option and press the OK button. Using the 0-9 digit and the < / > buttons,
enter desire frequency and press
the OK button.
Name : Allows to edit the channel name.
Using the
button, select the Name option.
Using the > botton select the first letter field.
By pressing the 0-9 digit repeatedly and using the following table select the first character.
Repeat the procedure for each letter field.
Press the OK button to confirm.
Store prog. : Allows to Save a channel on a new Program No., to Insert a
channel on an already existing Program No.(the channel previously saved
on this program no. will be shifted to the upper program no.) or to Delete the
Program No.
Once a channel has been found and named, use the
botton to select the Store prog. option.
Using the < / > buttons, select Save, Insert or Delete and press the OK button
to confirm.
Swap prog : Allows to swap 2 programme numbers.
Using the
/ buttons select the Prog. number option.
Using the < / > buttons, select the program to be moved.
Using the \/ botton, select the Swap prog option.
Using the OK botton, enter the swap function.
Using the 0-9 digit, enter the new programme number(3 digits).
Press the OK button to confirm, the programme numbers are swapped.
Norm : Allows to change the audio norm.
Using the
button, select the Norm option.
Using the < / > buttons, select the norm.
Note : the following norms are available to choose from : I for the UK and Ireland, L/LP for France and Luxembourg,
D/K for Eastern Europe, the Middle
East and Asia, B/G for Western Europe, Australia and New Zealand.
Skip : Allows to skip a channel.
To Next Page
Loading...
Need help?
General
