39
7.2 FW Upgrade
Take LE22H168 for example:
Step 1: Ready for F/W Upgrade
1.1 Prepare a USB memory (The file system of USB memory must be FAT16 or FAT 32).
1.2 Copy the file (EPI_LE22H168_USA_ZR748-A2_PCB4491-D_V1.09_20110218_72DB.ecc) you’re your
computer to the folder named “usbupdate" then copy this folder to USB memory root path, and remove it from
computer’s USB port!
Note: 1)
2) The version of this F/W is V1.09.
3) Make sure there is only one F/W file in your USB memory.
Step 2: F/W Upgrade
2.1 AC ON TV(Power plug Figure 2.1/2.2)
Figure 2.1 Figure 2.2
2.2 Press the power key on the Remote Control or the right side of TV to turn on TV.
Figure 2.3 Figure 2.4
To Next Page
Loading...
Need help?
General
