1 - Press the
Settings
key, select
Update Software
and
press
(right) to enter the menu.
2 - Select
Current Software Info
and press
OK
.
3 - The version, release notes, and creation date are shown.
Also, the Netflix ESN Number is shown, if available.
4 - Press
(left) repeatedly if necessary, to close the menu.
Copy a channel list
To copy a channel list…
1 - Switch on the TV. This TV should have channels installed.
2 - Plug in a USB flash drive.
3 - Press the
Settings
key, select
General settings
>
Channel
List Copy
and press
OK
.
4 - Select
Copy to USB
and press
OK
. You might be asked to
enter the Child Lock PIN code to copy the channel list.
5 - When copying is done, unplug the USB flash drive.
6 - Press
(left) repeatedly if necessary, to close the menu.
Now you can upload the copied channel list onto another AOC
TV.
Channel list version
Check the current version of the channel list...
1 - Press the
Settings
key, select
General settings
>
Channel
List Copy
and press
OK
.
2 - Select
Current version
, then press
OK
.
3 - Press
(left) repeatedly if necessary, to close the menu.
Upload a channel list
To TVs that are not installed
Depending on whether your TV is already installed or not, you
must use a different method to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select
language and country. You can skip the channel search. Finish the
installation.
2 - Plug in the USB flash drive that holds the channel list of the
other TV.
3 - To start the channel list upload, press the
Settings
key,
select
General settings
and press
OK
.
4 - Select
Channel List Copy
>
Copy to TV
and press
OK
.
Enter your PIN code if necessary.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB flash drive.
To installed TVs
Depending on whether your TV is already installed or not, you
must use a different method to upload a channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this setting,
see chapter Reinstall All Channels. Start this procedure until you
reach the country setting. Press
BACK
to cancel the
installation.)
If the country is correct continue with step 2.
If the country is not correct, you will need to start a
reinstallation. See chapter Reinstall All Channels and start the
installation. Select the correct country and skip the channels
search. Finish the installation. When done, continue with step 2.
2 - Plug in the USB flash drive that holds the channel list of the
other TV.
3 - To start the channel list upload, press the
Settings
key,
select
General settings
and press
OK
.
4 - Select
Channel List Copy
>
Copy to TV
and press
OK
.
Enter your PIN code if necessary.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB flash drive.
53
To Next Page
Loading...
Need help?
General
