OPERATION INSTRUCTIONS:
1. Start
The range finder has two buttons: the power button and the mode button “M”.
Press power button shortly to turn on. The LCD will display as shown in the below
figure.
2. Adjust the focus
The range finder is designed with an adjustable eyepiece(dioptre). By adjusting the
focusing dioptre within a -5 to +5 range, users with far sighted vision can use laser
range finder without glasses. Looking through the eyepiece, turn the dioptre left or
right until the view is focused with clarity to suit you.
3. Mode Selection
Our company produces different kinds of laser rangefinder, which all have different
functions. Each kind can change modes by short pressing the button “M”. Long
pressing M button to switch the unit of distance “meter” and “yard” in the mode of
“range measurement”. After the switch, the unit will be applied in these two modes.
To Next Page
Loading...