06
Daily alarm ON/OFF
1.When showing alarm time, press "ALARM " to activate the alarm with alarm
symbol showing.
2.Press "ALARM " again cancel the alarm
1.The clock automatically changes from set-up mode to time mode if no keys
are pressed for 15 seconds.
2.The alarm sounds for 2 minutes if no key is pressed to stop it.
Information:
Snooze function
To activate the snooze function, follow the steps below
Press the key "SNOOZE/LIGHT", while the alarm sounds, to activate the snooze
function.
If the snooze function is activated, Snooze symbol Zz is flashing.
The alarm repeat after 5 minutes.
The snooze function can be stopped by pressing any key.
12/24 hours mode
The time display can be in 12 （AM/PM）or 24 hours mode.
°C/°F temperature display
The temperature display can be in °C or °F. Press the key "-" to switch
between the mode.
Max/Min for indoor and outdoor temperature and humidity
Press the key “+“ to show the Max/Min of temperature and humidity
Hold the “+ ”button to delete readings from the memory
To Next Page
Loading...