Correct way for mounting the outdoor sensor:
Suggest the outdoor sensor to be hung on as below showing, better not stand it
at outside place,try to avoid direct sun shine or rain as much as possible.
04
Manual set-up
1.Press and hold key "MODE " for 3 seconds.
2.The 12/24 hour flashing. Use "+ " and "- " to select
3.Press "MODE " to confirm
4.The display for the hour is flashing. Use "+ " and "- " to select the hour.
5.Press "MODE "to confirm.
6.The display for the minutes is flashing. Use "+ " and "- " to select the minutes.
7.Press "MODE " to confirm.
8.The display for the year is flashing. Use "+ " and "- " to select the year.
9.Press "MODE " to confirm.
10.The display for the month is flashing. Use "+ " and "- " to select the month.
11.Press "MODE " to confirm.
To Next Page
Loading...