What to do if my AOpen 32HC5QR Monitor is missing a full-screen image?
If your AOpen monitor displays a missing full-screen image, use the OSD to select a different resolution or vertical refresh timing.
How to fix an AOpen Monitor with no picture but the LED is ON?
If the LED on your AOpen monitor is on but there's no picture, use the OSD to adjust the brightness and contrast to the maximum settings, or reset them to their default values.
Why is there no sound from my AOpen Monitor (Audio-Input Model)?
If there is no sound from your AOpen monitor (audio-input model), verify that the audio cable is connected to the host PC and that the volume on the host PC is not set to the minimum. Try increasing the volume level on your PC.
What to do if the display on my AOpen 32HC5QR Monitor is missing, shifted, or the wrong size?
If the display on your AOpen monitor is missing, shifted to the center, or the display size is too small or too large, use the OSD to adjust the RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION settings with non-standard signals.
Why is the picture on my AOpen 32HC5QR unstable?
If your AOpen monitor has an unstable picture, verify that the specifications of the graphics adapter and the monitor are compatible. A mismatch may cause an input signal frequency issue.
How to check the power connection of an AOpen 32HC5QR with no picture?
If your AOpen monitor has no picture, ensure the AC power cord is properly connected to the monitor and that the computer system is powered on.
Read instructions carefully for future reference and follow all warnings.
Follow guidelines for cleaning, unplug first, use soft cloth.
Connect/disconnect power carefully, ensure monitor is attached to base before connecting.
Ensure power outlet is accessible; unplug power cord from outlet when disconnecting.
Protect hearing by gradually increasing volume, limiting time, and avoiding loud environments.
Do not use near water, place on unstable surfaces, block vents, push objects into slots, or spill liquid.
Operate from indicated power type; consult dealer if unsure.
Refer servicing to qualified personnel; unplug before service.
Switch off device in explosive areas, obey signs and instructions.
Keep small parts out of reach of small children.
Adjust viewing angle, use footrest, or raise height for maximum comfort.
Reduce eyestrain by resting eyes, taking breaks, and blinking frequently.
Take breaks, stretch, breathe fresh air, and exercise for relaxing, productive use.
Adjust the monitor's tilt range for optimal viewing position.
Details pin assignments for the 19-pin display signal cable.
Details pin assignments for the 15-pin display signal cable.
Details pin assignments for the 24-pin USB Type C cable.
Follow the given steps for connecting cables and power.
Overview of function buttons and power button on the monitor base.
Explains how to use the OSD for adjusting settings like picture quality.
Instructions for adjusting settings using Type 1 button controls.
Instructions for adjusting settings using Type 2 button controls.
Instructions for adjusting settings using Type 3-1 button controls.
Instructions for adjusting settings using Type 3-2 button controls.
Troubleshoot no picture issues with LED status and cable checks.
Troubleshoot audio issues by checking cable connection and volume.
Troubleshoot unstable picture issues related to resolution and refresh timing.
Troubleshoot picture issues like missing or shifted display using OSD settings.
To Next Page
General
